Search for: All records

Biochar is frequently made using high-tech, high-control methods which will no doubt better optimize the final material for its intended purpose and increase its value. In contrast, we used low-tech, low-control methods to produce a developing world biochar (DWB) from two common crop wastes, cottonseed (CS) and pecan shell (PS). We created DWB biochar using a top-lit updraft microgasifier (TLUD) made from paint cans, and compared it to a biochar created in a muffle furnace held at 450 °C (MF450). We first used modern material characterization methods (yield, BET, SEM/EDS, TGA, XRD, FTIR) to understand the difference in biochar production methods on the feedstock. We then used batch equilibrium adsorption with cationic and anionic dyes (methyl orange, MO and crystal violet, CV) to examine environmental performance. The TLUD method generally has a lower biochar production yield than MF450 because we believe much of the material in the TLUD achieves temperatures > 450 °C and is sometimes difficult to retain in the device. The higher temperatures in the TLUD device lead to a biochar which is more microporous, has greater surface area, has less surface functional groups, has greater ash content, is more carbonized, and has lower residual cellulose crystallinity. There were differences in adsorption performance whereby the MF450 biochar adsorbs CV more strongly than the TLUD. For MO, PS-TLUD is less effective at adsorbing the dye when compared to PS-MF450, while CS-TLUD has a much higher adsorption strength than CS-MF450. We are not certain why the two methods show opposite effects in different feedstock but speculate that it may have to do with the much higher mineral content in the PS-TLUD compared to its MF450 counterpart. Out of many isotherms examined Freundlich and Langmuir isotherms provide a best-fit to our data only about half the time. Sometimes an S-shaped isotherm was the best fit or still fit the data reasonably well. Comparing the dye adsorption to other studies, the DWB does not adsorb as well, yet it is still effective for removal at environmental dye concentrations of relevance. Overall, we conclude that DWB, made in this uncontrolled fashion, can make a reasonably high quality biochar based on material properties and environmental performance. We suggest that additional research be done on other low-tech biochar production methods to see how to scale-up and optimize them according a developing world community's intended use.